Openi ng and closing, Side windows – Mercedes-Benz GLK-Class 2015 Owners Manual User Manual
Page 93

G
WARNING
If children are left unsupervised in the vehicle,
they could:
R
open the doors, thus endangering other
people or road users.
R
get out and disrupt traffic.
R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R
release the parking brake.
R
shifting the automatic transmission out of
park position P
R
Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
Side window reversing feature
The side windows are equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts a side window during the
closing process, the side window opens again
automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing a side window.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 1/6 in(4 mm) of the closing
movement
R
during resetting
R
when closing the side window again man-
ually immediately after automatic reversing
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows
:
Front left
;
Front right
=
Rear right
?
Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side window.
The switches on the driver's door take prec-
edence.
i
The side windows cannot be operated
from the rear when the override feature for
the side windows is activated (
Y
page 67).
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
To open: press the corresponding switch.
X
To close: pull the corresponding switch.
i
If you press/pull the switch beyond the
point of resistance, automatic operation is
started in the corresponding direction. You
can stop automatic operation by pressing/
pulling the switch again.
i
You can continue to operate the side win-
dows after you switch off the engine or
remove the SmartKey. This function is
Side windows
91
Openi
ng
and
closing
Z