On-board computer and displays, Menus and submenus – Mercedes-Benz GLK-Class 2015 Owners Manual User Manual
Page 232

If the
Blind Spot Assist Sensors Deac‐
Blind Spot Assist Sensors Deac‐
tivated
tivated
or
Act. Blind Spot Asst. Sen‐
Act. Blind Spot Asst. Sen‐
sors Deactivated
sors Deactivated
message appears, the
radar sensor system is deactivated.
X
Switch on the radar sensor system
(
Y
page 233).
For further information about Blind Spot
Assist, see (
Y
page 203).
For further information about Active Blind
Spot Assist, see (
Y
page 207).
Activating/deactivating Lane Keeping
Assist
X
Press the = or ; button on the steer-
ing wheel to select the
DriveAssist
DriveAssist
menu.
X
Press the 9 or : button to select
Lane Keep. Asst.
Lane Keep. Asst.
X
Press the a button.
The current selection is displayed.
X
Press a to confirm.
X
Press the : or 9 button to set
Off
Off
,
Standard
Standard
or
Adaptive
Adaptive
.
X
Press the a button to save the setting.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the multifunc-
tion display shows the lane markings as
bright lines in the assistance graphic.
For further information about Lane Keeping
Assist, see (
Y
page 205).
For further information about Active Lane
Keeping Assist, see (
Y
page 210).
Maintenance menu
In the
Service
Service
menu, you have the following
options:
R
Calling up display messages
(
Y
page 235)
R
Checking the tire pressure electronically
(
Y
page 339)
R
Calling up the service due date
(
Y
page 304)
Settings menu
Introduction
In the
Settings
Settings
menu, you have the following
options:
R
Changing the instrument cluster settings
(
Y
page 230)
R
Changing the light settings (
Y
page 231)
R
Changing the vehicle settings
(
Y
page 232)
R
Changing the convenience settings
(
Y
page 233)
R
Restoring the factory settings
(
Y
page 234)
Instrument cluster
Selecting the unit of measurement for dis-
tance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Press the : or 9 button to select the
Inst. cluster
Inst. cluster
submenu.
X
Press a to confirm.
230
Menus and submenus
On-board
computer
and
displays