Mercedes-Benz GLK-Class 2015 Owners Manual - Manual (Page 233)

X Press the : or 9 button to select the
Display unit Speed-/odometer Display unit Speed-/odometer func-
tion.
You will see the selected setting: km km or
Miles Miles .
X Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R Digital speedometer in the Trip Trip menu
R Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R Navigation instructions in the Navi Navi menu
R Cruise control
R DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X
Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display: Permanent Display: function.
You will see the selected setting Outside Outside
Temperature Temperature or Additional Speedome‐ Additional Speedome‐
ter [km/h] ter [km/h] / Additional Additional Speedometer Speedometer
[mph] [mph] .
X
Press the a button to save the setting.
i The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
X Press the = or ; button on the steer-
ing wheel to select the Sett. Sett. menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Day Lights Day Lights function.
If the Day Lights Day Lights function has been
switched on, the cone of light and the W
symbol in the multifunction display are
shown in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 117).
Setting the brightness of the display/
switch
X Press the = or ; button on the steer-
ing wheel to select the Sett. Sett. menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches: Brightness Display/Switches: func-
tion.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from Level 1 Level 1 to
Level 5 Level 5 (bright).
X
Press the a or % button to save the
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
X
Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Surround Lighting Surround Lighting function.
When the Surround Lighting Surround Lighting function is
activated, the light cone and the area
Menus and submenus
231
On-board
comput
er
and
display
s
Z