Canon 510 HS - Manual (Page 73)

Using Face ID
73
Register face information.
z Follow steps 2 – 3 on p. 68 to shoot, and then
register the new face information.
z Registered faces are more easily recognized
if you add a variety of face information. In
addition to a head-on angle, add a slight side
angle, a shot when smiling, and shots inside
and outside.
Access the [Check/Edit Info]
screen.
z Following step 1 on p. 67, touch [Check/Edit
Info].
Choose the name of the person
whose face info you want to erase.
z Touch the name of the person whose face
info you want to erase.
Access the [Face Info List] screen.
z Touch [Face Info List].
Choose the face info to erase.
z Touch [Erase], and then touch the face info
you want to erase.
z After [Erase?] is displayed, touch [OK].
z The selected face info will be erased.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at least one
slot open, however you cannot overwrite any face information. Instead of
overwriting face info, first erase unwanted existing info (p. 73), and then register
new face information (p. 67) as needed.
Erasing Face Information