Canon 510 HS - Manual (Page 63)

Common, Convenient Features
63
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
z Follow step 1 on p. 62 and choose [.
X Once the setting is complete, [ is displayed.
z Follow step 2 on p. 62 to shoot.
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
Choose $.
z Following step 1 on p. 62, choose $ and
touch on the right edge of the screen.
Configure the setting.
z Touch qr to choose a value for the desired
option, and then double-touch ^.
X Once the setting is complete, $ is displayed.
z Follow step 2 on p. 62 to shoot.
Using the Self-Timer to Avoid Camera Shake
Customizing the Self-Timer
• For movies shot by touching , [Delay] represents the delay before
recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the flash
fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain
lit in case the flash fires.)