Kontron OmniClient - Manual (Page 8)

OmniClient –User’s Guide (V1.02)
www.kontron.com 7
 All plugs on the connection cables must be screwed or locked to the housing.
 The device is designed to be mounted and operated only in the position described in this
document. The proper mounting is a vertical position with the interfaces downwards.
 This device generates heat during operation. Make sure it is adequately ventilated. Do not
cover the air intake and exhaust openings of the device.
 Repairs may only be carried out by a person authorized by Kontron.
 Maintenance or repair on the open device may only be done by qualified personnel authorized
by Kontron, who is aware of the associated dangers.
 The device may only be opened in accordance with the description in this user’s guide for the
following:

Replacing the Lithium battery

Installing the PCIe board

Configuration of the RS232/RS422/RS485 interface
These procedures have to be carried-out only by qualified specialist personnel.
 When accessing internal components the device must be switched off and disconnected from
the power source.
 Only approved original accessories (optional parts) approved by Kontron may be used.
 The DC-input must fulfill SELV requirements of EN60950-1 standard.
 Safe operation is no longer possible when:
o the device has visible damage
o the device no longer functions
In these cases the device must be shut down and secured against unintentional operation.