Kontron OmniClient - Manual (Page 17)

OmniClient – User’s Guide (V1.01)
16 www.kontron.com
7.1. OmniClient Touch Monitor Base
The touch-monitor base is configurable during ordering as a 15.6”, 18.5” or 21.5” display size.
Each touch-monitor base is equipped with a color TFT-LCD screen and multi-point projective
capacitive touch screen (PCAP). Other optional features available in the display base and
configured during ordering are a 5MP, USB camera and/or a WiFi USB module. The display base is
fanless; cooling of the display is through the surface of the display bezel and air openings located
on the top and bottom on the rear of the display bezel. The tables below detail the technical
specifications of the touch-monitor available options.
When operating the OmniClient, make sure the air openings on the rear of the
display bezel are unobstructed.
The OmniClient Touch Monitor is designed to comply with IP65 protection class
at the front side.
Table 1. Display Specifications
Specification / Model HMI-OC156-xxxx HMI-OC185-xxxx HMI-OC215-xxxx
Viewable image size (diagonal) 54.6cm (21.5”)
Active Area 476.64mm (H) x 268.11mm (V)
Maximum Resolution 1920 x 1080
Pixel Pitch 0.248 x 0.248mm
Brightness 300 cd/m
2
(typical)
Color Depth 16.7 million colors
Contrast Ratio 5,000:1 (typical)
Response Time 16ms (typical)
Panel Backlight LED
Table 2. Touch Specifications
Specification / Model HMI-OC156-xxxx HMI-OC185-xxxx HMI-OC215-xxxx
Touch Technology Projected capacitive system Projected capacitive system Projected capacitive system
Sensor stack thickness 1.1mm 1.1mm 1.1mm
Cover glass thickness 1.1 +/-0.2mm 1.1 +/-0.2mm 1.1 +/-0.2mm
Touch Method Fingers and thin gloves Fingers and thin gloves Fingers and thin gloves
Touch Point 6 touches 6 touches 6 touches
Response Time 25ms 25ms 25ms
Interface USB 2.0 USB 2.0 USB 2.0