Rear side, Pcie riser card, Fig. 15: rear side of omniclient – Kontron OmniClient User Manual
Page 30
OmniClient –User’s Guide (V1.02)
www.kontron.com
29
7.8. Rear Side
Fig. 12: Rear side of OmniClient
1 Screws for securing the system with
mounting clamps to a Instrument
panel (12x screws)
2 Mounting clamps (6x)
3 Touch Monitor Base air vents
4 Product Identification label
5 Windows (if applicable) Key label
6 WiFi/RFiD controller access cover.
Note for mounting clamps:
The OmniClient 15.6”/18.5”/21.5” system will be secured into an instrument panel
or cabinet with two mounting clamps on the top and bottom surfaces and one on
each the left and right surfaces as shown in fig15, position 2.
7.9. PCIe Riser Card
The OmniClient can be extended with one PCI-Express slot, depending on the system
configuration ordered. You can expand your system with extension cards that are full-height/half-
length size. The PCIe slot is 2.0 compliant and provides x16 channels.
The power consumption of the PCIe card must not exceed 25W maximum.
6
2
1
2
1
1
2
1
1
2
1
3
3
4
5