Kontron OmniClient - Manual (Page 19)

OmniClient – User’s Guide (V1.01)
18 www.kontron.com
7.2. OmniClient Computer Base
The computer base is designed around an embedded Mini-ITX motherboard. The computer base
is highly customizable to fit the requirements of its application. Table xxx details the options
available in the OmniClient computer base.
The OmniClient system can be powered by +24VDC (+/-20%) or an AC (115-220VAC, 50-60Hz)
power source.
The OmniClient Computer Base is a fan cooled system. The cooling of the unit is performed by
two system fans, power supply fan and an internal CPU cooler. The air-flow direction through the
computer base is upward from the IO panel to the top of the computer base.
When powering the OmniClient system, make sure that the air intake and
exhaust openings are not obstructed.
All computer base fans are controlled by on-board thermal sensors. It is normal
for the fans to speed up and slow down depending on ambient thermal
conditions and on processor/power loading.
Table 5. Configration Capability
Specification Configurable Capability
Power Supply 90-260VAC Manufacturer Only
+24VDC (+/- 20%) Manufacturer Only
Motherboard Kontron KTQM67/mITX Manufacture Only
CPU Option Manufacturer or User (must use
approved CPU cooler)
Memory Manufacturer or User (must use
approved Memory modules)
HDD / SDD 2x Internal 2.5” HDD/SDD (SATA) slots Manufacturer or User
PCIe Expansion Port PCIe x16. The system can be equipped with an installed PCIe riser
card allowing expansion for one PCIe card
Manufacturer Only
DB9 cutouts 2x DB9 cutouts are available and can be equipped with additional
RS232/RS422/RS485 interfaces
Manufacturer or User
Airflow
Direction