Kontron COMe-cDC2 - Manual (Page 91)

COMe-cDC2 / BIOS Operation
North Bridge Configuration
Feature Option Description
DRAM Frequency Auto
400Mhz
533Mhz
Selects the DRAM frequency
Configure DRAM Timing by SPD Disabled
Enabled Disables and Enables automatic DRAM configuration via
SPD EEPROM
Memory Hole Disabled
15MB-16MB
Disables and Enables the incredible useless extended
memory hole
Graphic Device Priority IGD
PCI/IGD
Selects which graphics adapter is initialized during boot
up and gets priority
Internal Graphics Mode Select Disabled
Enabled, 1MB
Enabled, 8MB Select the mode for the interal graphicdevice
Chipset Thermal Throttling Disabled
Enabled
Disables and Enables Chipset Thermal Throttling.
DT in SPD Disabled
Enabled
The GMCH supports the Delta Temperature (DT) in SPD
thermal managmeent algorithm as specified by JEDEC.
TS on DIMM Disabled
Enabled
Disables and Enables the Thermal Sensor on DIMM.
DMI PM Disabled
Enabled Disables or Enables DMI/FSB power management. If
disabled, PCI performance will improve slightly.
91