Kontron COMe-cDC2 - Manual (Page 67)

COMe-cDC2 / BIOS Operation
IDE Configuration
Feature Option Description
ATA/IDE Configuration Disabled
Compatible
Enhanced
Disables or selects the mode for the ATA/IDE interface
Legacy IDE Channels SATA only
SATA Pri, PATA Sec
PATA only
Selects the IDE channel behavior in compatible mode.
(Only visible when IDE is configured to Compatible
Configure SATA# as IDE
AHCI
Selects the SATA mode in Enhanced IDE mode
Configure SATA# Channels Before PATA
Behind PATA
Configure when the SATA controller is initialized in
Enhanced IDE mode
Hard Disk Write Protect Disabled
Enabled
Disables/enables device write protection. It will be
effective only if device is accessed through BIOS
functions.
IDE Detect Time Out (Sec.) [0-35] 35 Selects the time out value for the detection of ATA/
ATAPI devices
ATA(PI) 80Pin Cable Detection Host & Device
Host
Device
Selects the mechanism for detecting 80Pin ATA(PI)
cables.
67