Kontron AM5030 uEFI - Manual (Page 60)

The uEFI Shell AM5030 uEFI BIOS
Page 54 ID 1037-1209, Rev. 1.0
P R E L I M I N A R Y
kboot
FUNCTION: Boot a legacy OS
Not to be used for uEFI BootLoaders!
SYNTAX: kboot [-?|-d|-p|-p |-n |-t ]
where:
? Show online help
-d Boot default order
-p Specify the path to the device to boot from
-n Specify the device name to boot from
-t Specify the device type to boot from
Available types are:
floppy
harddrive
cdrom
network
usb-floppy
usb-harddrive
usb-cdrom
DESCRIPTION: The kboot command boots a legacy OS. Boot device can be selected in
a very flexible way. If the requested device is not present, boot returns
to shell. The kboot command cannot boot native uEFI operating
systems. But since these are bootable from shell by calling their
bootloader, this is not necessary either. If a requested device is present
but not bootable, uEFI continues to boot with the next bootable device in
the boot order.
USAGE: Show all connected devices:
COMMAND / RESPONSE:
fs0:\> kboot
____BBS_TABLE____
00002 network “IBA GE Slot 0100 v1300”
00003 network “IBA GE Slot 0101 v1300”
00004 network “IBA GE Slot 0200 v1300”
00005 network “IBA GE Slot 0201 v1300”
00002 usb-harddrive “SanDisk uSSD 5000 0.1”
Device path: Acpi(PNP0A03,0)/Pci(1A|7)/Usb(1,0)
0001 usb-harddrive “KingstonDataTraveler 2.04.10”
Device path: Acpi(PNP0A03,0)/Pci(1D|7)/Usb(1,0)
Boot from device containing the string “Kingston”:
fs0:\> kboot -n Kingston
Boot from the first device found that is of type floppy:
fs0:\> kboot -t floppy