Kontron AM5030 uEFI - Manual (Page 24)

Advanced Setup AM5030 uEFI BIOS
Page 18 ID 1037-1209, Rev. 1.0
P R E L I M I N A R Y
3.3 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the EFI console.
3.3.1 COM0
The COM0 port (serial port 0) corresponds to the serial port on the front panel of the AM5030.
3.3.1.1 Console Redirection
Default setting: Enabled
3.3.1.2 Console Redirection Settings
For information about this function, refer to Chapter 3.4.4 in this manual.
A p t i o S e t u p U t i l i t y - C o p y r i g h t ( C ) 2 0 0 9 A m e r i c a n M e g a t r e n d s , I n c .
A d v a n c e d
COM0
Console Redirection [Enabled]
 Console Redirection Settings
COM4 (PCI Dev0, Func0) (Disabled)
Console Redirection [Port Is Disabled]
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
Out-of-Band Mgmt Port [COM0]
Data Bits 8
Parity None
Stop Bits 1
Terminal Type [VT-UTF8]

: Select Screen

: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save ESC: Exit
Ve r s i o n 2 . 0 0 . 1 2 0 1 . C o p y r i g h t ( C ) 2 0 0 9 A m e r i c a n M e g a t r e n d s , I n c .
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for the serial port 0.
Enabled Use this setting to enable console redirection for the serial port 0.