Kontron AM5030 uEFI - Manual (Page 28)

Advanced Setup AM5030 uEFI BIOS
Page 22 ID 1037-1209, Rev. 1.0
P R E L I M I N A R Y
3.3.4.3 Data Bits
Default setting: 8
3.3.4.4 Parity
Default setting: None
3.3.4.5 Stop Bits
Default setting: 1
3.3.4.6 Flow Control
Default setting: None
3.3.4.7 Resolution 100x31
Default setting: Disabled
3.3.4.8 Legacy OS Redirection
Default setting: 80x24
SETTING DESCRIPTION
7 Use one of these settings to specify the number of data bits per frame.
8
SETTING DESCRIPTION
None Use one of these settings to select the parity for the serial port.
Even
Odd
Mark
Space
SETTING DESCRIPTION
1 Use one of these settings to specify the number of stop bits for the serial port.
2
SETTING DESCRIPTION
None Use one of these settings to specify the type of flow control to be used for this serial port.
Hardware RTS/CTS
SETTING DESCRIPTION
Disabled Use this setting the disable extended terminal resolution.
Enabled Use this setting the enable extended terminal resolution.
SETTING DESCRIPTION
80x24 Use one of these settings to select the number of rows and columns for legacy OSredirec-
tion.
80x25