Kontron AM5030 uEFI - Manual (Page 57)

AM5030 uEFI BIOS The uEFI Shell
ID 1037-1209, Rev. 1.0 Page 51
P R E L I M I N A R Y
SETTINGS: vga: VGA port configuration
disabled: Disable VGA port configuration
[enabled]: Enable VGA port configuration
bootvideo: Select preferred boot video device
amc: Use video on the AMC port
onboard: Use onboard graphics
wr_prot_eeprom: System EEPROM write protection
[disabled]: Do not write protect the system EEPROM
enabled: System EEPROM is write-protected after POST
wr_prot_sata: Onboard SATA Flash write protection
[disabled]: Do not write protect the onboard SATA Flash
Warning!
The SATA Flash module is factory-configured to disabled. Do not
change this setting.
enabled: This setting is reserved for factory purposes. Do not use
this setting.
wr_prot_spi: EFI SPI Flash write protection
[disabled]: Do not write protect the EFI SPI Flash
enabled: The EFI SPI Flash is write-protected after POST
kboardconfig