Kontron AM5030 IPMI - Manual (Page 19)

AM5030 IPMI Firmware User Guide
ID: 1042-7364, Rev. 1.0 Page 19
BRIDGING COMMANDS (ICMB) O
Bridge Request [ICMB] Bridge 20h O / No
Bridge Message [ICMB] Bridge 21h O / No
EVENT COMMANDS (ICMB) O
Get Event Count [ICMB] Bridge 30h O / No
Set Event Destination [ICMB] Bridge 31h O / No
Set Event Reception State [ICMB] Bridge 32h O / No
Send ICMB Event Message [ICMB] Bridge 33h O / No
Get Event Destination [ICMB] Bridge 34h O / No
Get Event Reception State [ICMB] Bridge 35h O / No
OEM COMMANDS FOR BRIDGE NETFN O
OEM Commands [ICMB] Bridge C0h-FEh O / No
OTHER BRIDGE COMMANDS O
Error Report [ICMB] Bridge FFh O / No
Table 3: Standard IPMI Commands
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON MMC