Kontron AT8904 - Manual (Page 23)

AT8904M Introduction
Page 1 - 10 AT8904M User Guide
General
Safety Designed to meet or exceed the following:
• UL 60950, 3rd edition
• EN 60950
• LVD 73/23/EEC
• Denan Law
EMC Designed to meet or exceed the following:
• FCC 47 CFR Part 15, Subpart B
• EN55022, EN55024
• EN 300 386
Reliability • MTBF: > 144,300 hours @ 40°C / 104°F (Telcordia SR-332, Issue 1)
HW Monitoring
LEDs • ATCA LEDs:
• 4 LEDs ("Ready for Hot Swap", "Out of Service", "Healthy", "Heart Beat")
• Ethernet:
• Shielded RJ-45 connectors with integrated LED's
• Fabric/Base Ports :
• 4x/4x Shielded RJ-45 connectors with integrated LED's
• User LEDs:
• 4 LEDs ("Base Status", "Base Selected", "Fabric Status", "Fabric Selected")
• Switch LEDs:
• 16 LEDs (activity and link status for base or fabric channels, respectively)
• Display switch:
• switches between fabric or base switch port status display
Board Management • Based on IPMI 1.5
• FRU Management
• Sensors (Voltage, Current, Temperature, Fuse)
• Status and Alerting
• Hot Swap
• Electronic Keying of Base and Fabric Interfaces
Table 1-2: AT8904M Main Specifications (Continued)
AT8904M SPECIFICATIONS