Kontron AT8904 - Manual (Page 16)

AT8904M Introduction
Page 1 - 3 AT8904M User Guide
1.1.1 AT8904M Features
PICMG 3.0 compliant Hub Board
• Supports Base Interface (GbE)
• Supports Fabric Interface (10GbE)
• For 14 and 16 slot shelves
• 2 mid-size AMC slots for customization
• Uplinks for Base and Fabric Interface
• Comprehensive protocol support
• Full Hot-Swap capabilities
• Full Redundancy support
Base Interface (PICMG 3.0)
• Non-blocking layer 2/3 switching/routing
• 4x10/100/1000BASE-T uplinks on front panel
• 2xGbE connection to AMC slot B1
• 1xGbE connection to AMC slot B2
Fabric Interface (PICMG 3.1)
• Non-blocking layer 2 switching with VLANs
• 10GbE connection to redundant Hub Board
• 10GbE connections to payload slots 2-15
• 1x10/100/1000BASE-T uplink on front panel
• Dual 10GbE connection to each AMC slot
Management and Protocols
• Management via SNMP, TELNET, CLI
• In-band
• Out of band via Ethernet or RS232
• IPMI version 1.5
• Ethernet/Bridging protocols include
• Link aggregation (802.3ad)
• VLANs (802.1Q)
• Spanning tree (802.1D, 802.1w)
• QoS (802.1p)
• Flow control (802.3x)
• GVRP, GMRP