Kontron CP6003-RC IPMI - Manual (Page 35)

CP6003-SA/RA/RC IPMI Firmware
ID 1045-5656, Rev. 2.0 Page 35
P R E L I M I N A R Y
9. FRU Data
9.1 Structure and Functionality
The IPMI controller provides 4 kB non-volatile storage space for FRU information. For further
information regarding the FRU data, refer to IPMI - Platform Management FRU Information
Storage Definition v1.0, Document Revision 1.1.
Full low-level access to read or write the board's FRU Information is provided by regular IPMI
FRU Device commands. Care must be taken when writing FRU information directly using stan-
dard IPMI commands because there is no write protection. Invalid FRU information may disturb
a shelf management software which uses the FRU data.
9.2 FRU Version Identification
The FRU data fields, as defined in the IPMI specification, are used to record the version of the
FRU installed. The revision number is incremented for each new release of FRU data.
Example of board FRU ID: “STD_R10”
Example of product FRU ID: “STD_R10”
9.3 Board-Specific FRU Data
The following FRU data areas and data fields are supported:
FRU Board Info Area
• Manufacturing date / time
• Board manufacturer (C7): “Kontron”
• Board Product Name (C6): “CP6003-SA/RA/RC”
• Board Serial Number (CF): “123456789012345”
1)
• Board Part Number (C9): “123456789”
1)
• FRU File ID (C7): “STD_R10”
FRU Product Info Area
• Product manufacturer (C7): “Kontron”
• Product Name (C6): “CP6003-SA/RA/RC”
• Product Part Number (C2): “00”
1)
• Product Version (D9): “0000000000000000000000000”
2)
• Product Serial Number (D9): “0000000000000000000000000”
2)
• Asset Tag (D9): “_________________________”
2)
• FRU File ID (C7): “STD_R10”
• CustomData (D5): “MAC=CC:CC:CC:CC:CC:CC”
1)
1)
Field will be modified during the manufacturing process
2)
Field is free for user. Please note that changes need special care (checksums).