Oem commands and command extensions, 1 get device id command with oem extensions, Get device id command with oem extensions – Kontron CP6003-RC IPMI User Manual
Page 21: Cp6003-sa/ra/rc ipmi firmware
CP6003-SA/RA/RC
IPMI Firmware
ID 1045-5656, Rev. 2.0
Page 21
P R E L I M I N A R Y
6.
OEM Commands and Command Extensions
6.1
Get Device ID Command with OEM Extensions
The IPMI specification defines four optional bytes in the response to Get Device ID. The
response bytes [13:16] hold the “Auxiliary Firmware Revision Information”.
Table 5:
Get Device ID Command with OEM Extensions
COMMAND
LUN
NetFn
CMD
Get Device ID command with OEM extensions
00h
App = 06h
01h
REQUEST DATA
Byte
Data Field
-
-
RESPONSE DATA
Byte
Data Field
1
Completion Code
2:12
Regular Get Device ID Command response fields
13
Release number of the IPMI firmware:
10h for R10,
11h for R11,
…
Release number 1… of the IPMI firmware. The open tool “ipmitool” displays this as “SDR” in
the response to the command “ipmitool fwum status”.
14
Board Geographical Address (slot number):
1 … = Board in chassis slot 1…
15
Reserved
16
Reserved