Canon 1D X - Manual (Page 342)

342
85: Custom Controls
In manual exposure , you can set the shutter speed with the
<6> or <5> dial.
In manual exposure , you can set the aperture with the <6> or
<5> dial.
While looking at the rear LCD panel, you can press <0> to switch to
the other card or to change the image size. To switch to the other card,
turn the <6> dial. To change the image size, turn the <5> dial.
When you press the button assigned to this function, you can switch to
the image size set here. While the camera switches the image size, the
image size on the rear LCD panel and p or 1 in the viewfinder will
blink. After the shooting ends, the One-touch image quality setting will
be canceled automatically and the camera will switch back to the
previous image-recording quality.
*5: In step 3 on page 333, if you press the button, you can set the image size for
this function to switch to.
When you press the button assigned to this function, you can switch to
the image size set here. While the camera switches the image size, the
image size on the rear LCD panel and p or 1 in the viewfinder will
blink. Even after shooting, the One-touch image quality setting will not
be canceled automatically. To revert to the previous image size, press
the button assigned to this function again.
*5: In step 3 on page 333, if you press the button, you can set the image size for
this function to switch to.
: Shutter speed setting in M mode
: Aperture setting in M mode
: Image size selection
: One-touch image quality setting
: One-touch image quality (hold)
COP
Y