beautypg.com

Brake master cylinder – Jeep 2015 Cherokee - Owner Manual User Manual

Page 683

background image

WARNING!

Riding the brakes can lead to brake failure and
possibly a collision. Driving with your foot resting or
riding on the brake pedal can result in abnormally
high brake temperatures, excessive lining wear, and
possible brake damage. You would not have your full
braking capacity in an emergency.

Brake Master Cylinder
The fluid in the master cylinder should be checked when

performing under hood services or immediately if the

“Brake Warning Light” is illuminated.
Be sure to clean the top of the master cylinder area before

removing the cap. If necessary, add fluid to bring the

fluid level up to the requirements described on the brake

fluid reservoir. With disc brakes, fluid level can be

expected to fall as the brake pads wear. Brake fluid level

should be checked when pads are replaced. However,

low fluid level may be caused by a leak and a checkup

may be needed.
Use only manufacturer’s recommended brake fluid. Re-

fer to “Fluids, Lubricants, and Genuine Parts” in “Main-

taining Your Vehicle” for further information.

WARNING!

Use only manufacturer’s recommended brake

fluid. Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for further
information. Using the wrong type of brake fluid
can severely damage your brake system and/or
impair its performance. The proper type of brake
fluid for your vehicle is also identified on the
original factory installed hydraulic master cylinder
reservoir.

(Continued)

7

MAINTAINING YOUR VEHICLE 681