Home Legend Hardwood and Bamboo T-molding - Manual (Page 3)

Doc.ID: 095 Effective: 2-11-2013
Title: Installation Hardwood/Bamboo Stair Nose Rev.:2
Hardwood/Bamboo Stair Nose
Stair molding allows you to create stairs out of the hardwood/bamboo
of your choice. The stair nose is the trim piece that covers the front
edge of the step. The back end of the stair nose can be grooved or
stepped down. This installation procedure describes the step profile.
The step of the stair nose rests on the tongue of the floor. For the
groove profile, the method is similar, but the groove of the stair nose
is mated to the tongue of the floor.
Step 1.
Take a stair nose molding piece and place it on the edge of the step,
where it will be installed. Place the flooring plank to be used as the
new stair tread against the stair nose. Mark at where the position of
the floor as indicated in diagram.
Step 2.
Remove the pieces.