Home Legend Hardwood and Bamboo T-molding User Manual
Home Legend Furniture

Doc.ID: 148
Effective: 8-8-2013
Title: Installation Hardwood/Bamboo T-molding
Rev.:0
Hardwood and Bamboo T-molding
T-molding transition piece is used to transition between floors of similar heights. They often used to provide
expansion gaps for large areas or for when the floor is interrupted by wall openings or permanent fixture such
as a kitchen island. There are several ways to accomplish the task of installing T- molding. This is just one of
them.
Step 1.
Determine where the T-Molding will be installed. The usual location is
between two sections of flooring. Mark an area the width of the T-
post of the molding plus the required expansion gap on either side of
the post.
Step 2.
Apply adhesive to area where the foot of the T-molding will be secured
to the subfloor.
Step 3.
Secure the T-mold in place by pressing it down into the adhesive beads
and press down to secure completed bond between the T-post and the
subfloor.
Step 4.
Allow the glue to cure. Follow glue manufacturer’s instruction for
length of cure time.