Gastroback 40979 Design Stand Mixer Advanced Pro - Manual (Page 4)

32
IMPOrTAnT SAfeguArDS
• Carefully read all instructions before operating the Design Stand Mixer Advanced Pro for
the first time and save for future reference.
• Remove and safely discard any packaging material and promotional labels before using
the Design Stand Mixer Advanced Pro for the first time.
• To eliminate a choking hazard for young children, remove and safely discard the protec-
tive cover fitted to the power plug of this appliance.
• Do not place the Design Stand Mixer Advanced Pro near the edge of a bench or table
during operation. Ensure the surface is level, clean and free of water and other substances.
Vibration during operation may cause the appliance to move.
• Do not use the Design Stand Mixer Advanced Pro on a sink drain board.
• Do not place the Design Stand Mixer Advanced Pro on or near a hot gas, electric burner
or where it could touch a heated oven.
• Always ensure the Design Stand Mixer Advanced Pro is completely assembled before
operating. Follow the instructions provided in this book.
• Ensure the control dial is in the ‘Off’ position and the stand mixer is switched off at the
power outlet and the power cord is unplugged before attaching the beater, whisk or dough
hook.
• Do not use attachments other than those provided with the Design Stand Mixer Advanced
Pro. Use only the beater whisk and dough hook supplied with the mixer.
• Handle the Design Stand Mixer Advanced Pro and attachments with care. Never place
your fingers inside the mixing bowl or near the beater, whisk or dough hook during operati-
on.
• Keep hands, hair, clothing, as well as, spatulas and other utensils away from moving
beater, whisk or dough hook/during operation.
• Should an object such as a spoon or spatula fall into the bowl while mixing, immediately
ensure the control dial is in the ‘Off’ position, turn the Design Stand Mixer Advanced Pro off,
unplug at the power outlet and remove the object.
• Do not place hands in the mixing bowl unless the Design Stand Mixer Advanced Pro is
disconnected from the power outlet. Ensure the control dial is in the ‘Off ’ position, the De-
sign Stand Mixer Advanced Pro is switched off and unplugged from the power outlet before
removing the beater, whisk or dough hook.
• Ensure the motor and beater, whisk or dough hook have completely stopped before disas-
sembling.
• Always remove the beater, whisk or dough hook from the Design Stand Mixer Advanced
Pro before cleaning.
• Care should be taken when removing the food from the mixer bowl by ensuring the motor
and the beater, whisk or dough hook have completely stopped before disassembling. Ensure
the control dial is in the ‘Off” position, the appliance is switched off at the power outlet and
unplugged before unlocking the mixer motor head and moving into the upright position. The
beater, whisk or dough hook should be released from the mixer motor head before removing
the processed food from the mixer bowl and the beater, whisk or dough hook.