Gastroback 40979 Design Stand Mixer Advanced Pro - Manual (Page 14)

42
claim of the purchaser if the damage or defect of the appliance is caused by inappropriate
treatment, over loading or installation mistakes. The warranty claim expires if there is any
technical interference of a third party without an written agreement.
The purchaser has to present the sales slip in assertion-of-claim and has to bear all charges
of costs and risk of the transport.
TeChnICAl SPeCIfICATIOnS
Model: Art.-No.: 40979 Design Stand Mixer Advanced Pro
Power supply: 230-240 V AC, 50 Hz
Power consumption: 1.000 W
Length of power cord: ca. 1 m
Weight: 8 kg
Dimensions: ca. 41,5 x 20,0 x 35,5 cm (width x depth x height)
Capacity bowl: 4,7 Litre
Certification:
TrOuBleShOOTIng
Problem easy solution
Machine will not work when
switched “ON”
Always ensure the speed control dial is in the “Off” positi-
on before start.
The “thermo cut-off – Temperature Overload” protection
device has not been activated automatically, allow more
time for the motor to cool down.
Cannot set the time on the
count-down timer.
Always ensure the speed control dial is in the “Off” positi-
on before trying to set the count-down time.
Mixer suddenly switches off
during mixing.
The stand mixer has been stressed by overloading or
stalling. The stand mixer will automatically activate the
overload protection button and the unit will switch itself
off. When this happens it is recommended that the unit is
switched off at the power outlet and unplugged. The sa-
fety devices will the be reset and the Design Stand Mixer
Advanced Pro is ready to use again.