Gastroback 40138 Design Multi Juicer Digital - Smoothie - Manual (Page 15)

53
Fruit / Vegetables Speed
Apricots (stone removed) 2
Cucumber (peeled) 2
Kiwi fruit (peeled) 2
Mangoes (peeled, stone removed) 2
Nectarines (stone removed) 2
Peaches (stone removed) 2
Pears soft (stalks removed) 2
Plums (stone removed) 2
Melons (peeled) 2
Tomatoes 1
Watermelon (peeled) 1
Marking of display
Speed Marking
Speed 1 Soft Fruit
Speed 2 Soft Fruit, Citrus
Speed 3 Citrus
Speed 4 Pineapple, Apple
Speed 5 Pineapple, Apple, Hard Veg
Step 4:
Press the ‘On/Off’ switch on the control panel to ‘On’. The juicer will start to operate at
the selected speed. The speed can be changed at any time during the juicing process by
adjusting the variable speed control dial.
warninG: The feed chute is extra-large! Never put fingers, wooden spoons or other
foreign substances (such as hair, clothing, brushes, cloth) into the feed chute. never use
fingers to push food down the feed chute or to clear the feed chute. always
use the food pusher provided. with the motor running, place food into the
feed chute and use the food pusher to gently guide food down. to extract
the maximum amount of juice, always push the food pusher down slowly.
note: The Juicer will automatically stop operating if the motor is stalled for more than 10
seconds. This is a safety feature. Either too much food is being processed at one time or
the pieces are not small enough. Try trimming food, cutting food into smaller pieces of even
size and/or processing a smaller amount per batch. To continue juicing, reset the Design
Multi Juicer Digital by pressing the ‘On/Off’ switch on the control panel to ‘Off’, then turn
the appliance back on by pressing the ‘On/Off’ switch to ‘On’.
Step 5:
As fruit and vegetables are processed, juice will flow into the juice jug and the separated
pulp will accumulate in the pulp container.