FEBCO 601-M Metal Air Gap Drains - Manual

IS-F-601MAGDK
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instructions
1. If installed indoors, the assembly should be installed near a floor drain
sized to adequately handle discharge.
2. After installation of backflow assembly and piping, attach drain funnel to
relief as shown, using self tapping screws provided in kit to join drain
funnel halves together, making sure that the slots in the drain funnel are
located over tabs on relief valve port.
Series 601-M
Metal Air Gap Drain Kits
Sizes: 1 ⁄
2
" - 2"
601
IS-F-601MAGDK 1330 EDP# 980142 © 2013 FEBCO
Limited Warranty: FEBCO (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special
or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting
from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no
control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above
limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to
determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or
other reproductive harm.
For more information: www.watts.com/prop65
A Watts Water Technologies Company USA: Tel: (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.FEBCOonline.ca
NOTICE
This type of air gap drain may not be approved for use in some areas.
NOTICE
The gap drain is not designed to catch the maximum discharge
possible from the relief valve. The installation of FEBCO air gap with the
drain line terminating above a floor drain will handle any normal discharge
or nuisance spitting through the relief valve. However, floor drain size may
need to be designed to prevent water damage caused by a catastrophic
failure condition. Do not reduce the size of the drain line from the
air gap fitting.
NOTICE
Drain funnel was not designed to, nor is it able to support drainpipe
weight. Support the drain piping by other appropriate means.
WARNING !
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
You are required to consult the local building and plumb-
ing codes prior to installation. If the information in this
manual is not consistent with local building or plumbing
codes, the local codes should be followed. Inquire with
governing authorities for additional local requirements.
WARNING !