FBT MMZ 6000 - Manual (Page 26)

25
REMOTE CONTROLS UK
TRC 6000
Kit including a TX 6000 transmitter (IR remote control) and a RX 6000 IR
receiver.
# The zone transmitter allows to adjust: volume, high and low tones, power
on/off and input selection (tape, tuner, etc.)
# The receiver is connected to the matrix through a 4-conductor telephone
cable (max. length 500 m) ending with an RJ-45 connector (PIN 1,2,3,4).
The maximum operation distance between the transmitter and the receiver is
20 mt (without obstacles between them).
IMPORTANT NOTICE:
INSTALLATION
TX6000
RX6000
For the support use a common module for flush mounting junction boxes as
those used for electric installations and drill a hole (Ø18mm) in the middle by
using a drilling machine.
1
2 Insert the following components as in the order below:
1) the cylindrical sealing (A) in the module
2) the printed circuit (B) into the cylindrical sealing
3) the aluminium retainer (C) in the related holes (D) by fixing it
with the appropriate screws
A B C
D
RJ 45
Pin 2
Pin 1
Pin 3
Pin 4
CODE: 31144
Pin 2
Pin 1
Pin 3
Pin 4