FBT MMZ 6000 - Manual (Page 24)

23
USE MENÙ UK
SUB/FULL: a low-pass filter can be set at the SUB/MNO
output; activating the filter allows using an active subwoofer (for
low frequencies only).
The “Select Zone” menu allows adjusting the Sensitivity and
Gain of all the inputs.
Use the ESC button to enter the “Select Source” menu and
select, through the ZONE EDIT buttons (1), the sound source
where Gain and Sensitivity parameters are to be set:
°
M1 (MBT 6000 microphone 1)
°
TP (tape)
°
M2 (MBT 6000 microphone 2)
°
CD (CD player)
°
A(auxiliary)
°
TU (tuner)
Zone 1 Function
Select Sub/Full
Select Zone
1 2 3 4 5 6
GAIN AND SENSITIVITY SETTING
Select Source
M1 TP M2 CD A TU
Tuner Function
Select Sensit.
Tuner Function
Select Gain
The Sensitivity parameter sets the signal amplitude to be
supplied to the input of the amplifier in order to obtain the
maximum output power. The adjustment range is from 0 to
15dB.
The Gain control measures how wide is the amplification
obtained through an electric circuit. The adjustment range is
from -80dB to +32dB.