ETS-Lindgren FP5080 Isotropic Electric Field Probe (Archived) - Manual (Page 45)

NiCd Battery Fast Charger
© ETS-LINDGREN L.P. – December 2004
REV B- PN H-600086
3.0 Unpacking and Acceptance
Introduction
This section contains information on unpacking and acceptance
of the 491198-36 NiCd Battery Fast Charger.
Step 1. Upon delivery of your order, inspect the shipping
container(s) for evidence of damage. Record any damage on
the delivery receipt before signing. In case of concealed
damage or loss, retain the packing materials for inspection by
the carrier.
Step 2. Remove the product from its shipping container. Save
boxes and any protective packing materials for future use.
Step 3. Check all materials against the packing list to verify that
the equipment received matches that which was ordered. If you
find any discrepancies, note them and call ETS-Lindgren
Customer Service for further instructions.
Be sure that you are satisfied with the contents of your order and
the condition of your equipment before using it.
Archived 4/02/10