ETS-Lindgren FP5080 Isotropic Electric Field Probe (Archived) - Manual (Page 29)

HI-4450 Isotropic Electric Field Probe
© ETS-LINDGREN L.P. – December 2004
REV B - PN H-600086A
6. APPENDIX A:
HI-4450/FP2080/FP4080/FP5080
ERROR CODES
PROBE ERROR OUTPUT
If an error occurs, the probe will respond with one of the
following strings. These strings begin with a colon and end with
a carriage return.
E01
Communication error (e.g., overflow).
E02
Buffer full error. Too many characters contained
between the Start Character/Carriage Return sequence.
E03
The received command is not valid.
E04
The received parameter is not valid.
E05
Hardware error (e.g., EEPROM failure).
E06 Parity
error.
Archived 4/02/10