ETS-Lindgren FP5080 Isotropic Electric Field Probe (Archived) - Manual (Page 41)

NiCd Battery Fast Charger
© ETS-LINDGREN L.P. – December 2004
REV B- PN H-600086
1.0 General Safety Considerations
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in order
to avoid any problems.
Warning This is a Safety Class I product (provided with
a protective earthing ground incorporated in the
power cord). The mains plug shall only be
inserted in a socket outlet provided with a
protective earth contact. Any interruption of the
protective conductor, inside or outside the
instrument, is likely to make the instrument
dangerous. Intentional interruption is
prohibited. DO NOT defeat the earth-
grounding protection by using an extension
cable, power cable, or autotransformer without
a protective ground conductor.
This instrument is to be used with a three-wire
power cord set which meets or exceeds the
requirements of EN60799. The power cord set
used must be rated for a minimum of
250V/10A. When connected to an appropriate
power line outlet, this cable grounds the
instrument cabinet.
Warning--No operator serviceable parts exist
inside the device. Refer servicing to qualified
personnel. To prevent electrical shock, do not
remove cover.
Warning--If this instrument is used in a manner
not specified by ETS-Lindgren, the protection
provided by the instrument may be impaired.
Warning--This battery charger incorporates
parts, such as a switch and relay that
potentially could produce sparks or arcs.
Warning--For indoor use only, do not expose
to rain.
Archived 4/02/10