Call waiting, Mute, Hearing aid compatibility – ClearSounds TALK500 ER User Manual
Page 9

8 – ENGLISH
9 – ENGLISH
the number matches with a name recorded in the phone book, if not,
it will say the numbers of the calling party. This feature allows you
to decide to pick up the phone or not depending on who is calling. If
you want to talk to the caller:
1 pick up the handset or press button to answer the call.
2 At the end of the call, return the handset to the cradle or press
button again.
Call Waiting
Many special telephone services, such as Call Waiting, require a
switch-hook signal. For example, if you have Call Waiting, you can
put a call on hold and take a second incoming call on the same line
by pressing Cal Waiting button. press Call Waiting again to alternate
between the two calls.
Note: If you do not have any special phone services requiring a switch-
hook signal, pressing Call Waiting might disconnect the current calls.
Mute
Use the mute button so that the person on the other end of the
line will not hear what you are saying. You can continue to hear the
person on the other end.
1 press and hold the MUTE button to mute the call.
2 Release the MUTE button and you will be able to continue the
conversation.
Hearing Aid Compatibility
This unit is compatible with inductively coupled hearing aids and
cochlear processors. Adjust your hearing aid’s or processor’s
“T-switch” to the “T” position. Make sure to hold the handset close
to your hearing aid or processor.
USING THE REMOTE PENDANT
Setting the Remote pendant
The phone comes with one remote pendant for emergency, you can
pair up to a total of 5 pendants to your phone, FULL appears if you
attempt to pair a 6
th
pendant. To pair the pendant to your phone:
1 Press and release the MENU button until REMOTE PENDANT
appears Press DIAL Press or , to pair (pAIRING appears) or
cancel pairing (DELETE? appears) to set your pendant.
2 To pair your pendant to your phone, select PAIRING, press DIAL
on the phone, PAIRING… appears, press the red button on the
pendant. If the pendant is successfully paired, PAIRED appears, if
Talk500ER-Trilingual.indd 9
5/13/08 8:39:09 AM