ClearSounds TALK500 ER - Manual (Page 17)

16 – ENGLISH 17 – ENGLISH
Copy From The Caller ID To The Phonebook
You can copy Caller ID information to the phone book while you are
reviewing the Caller ID information.
• Select the required Caller ID memory location by pressing or .
• Press and hold MENU button for two seconds, display will show
COPY TO MEMORY.
• Press DIAL button, display will show SAVED!
TROUBLESHOOTING GUIDE
No dial tone
1 Check that all phone cord connections (including the curly cord) and
AC Adapter are securely plugged into the telephone & wall jack.
2 Check that the phone is in the correct dialing mode, Touch-Tone /
pulse Setting.
3 plug another phone into the jack to make sure your phone service
is functioning properly.
Call will not dial or dials very slowly
1 Check that the phone is in the correct dialing mode, Touch-Tone /
pulse Setting
No audible ringer
1 You may have too many extensions on your line. Try unplugging
a few devices. Having too many telephones /accessories can also
create problems such as low ringer volume or impaired quality
during calls.
No amplification
1 Check to see if the amplify button is “oN”. The red light should be lit.
2 Check the AC power Adapter and make sure it is plugged into the
wall and into the appropriate jack on the phone.
Noise, Static, Interference while using the handset
1 A filter may be required for homes with DSL line or near Radio
towers.
There is a red light that continues to flash
1 You have un-reviewed Caller ID / Call Waiting information or
missed a call.
Caller ID information does not show
1 Make sure you are subscribed to Caller ID through your local phone
company.
Talk500ER-Trilingual.indd 17 5/13/08 8:39:10 AM