ClearSounds TALK500 ER - Manual (Page 14)

14 – ENGLISH 15 – ENGLISH
5 You can move the cursor to the required position by pressing or
. To delete the digit, press DELETE button, or press any numeric
key to inset the digit and confirm with DIAL button. Then the
display shows the flashing first letter of the name.
6 Move the cursor to the required position by pressing or . To
delete the letter, press DELETE button, or press any numeric key
to replace the name, and confirm with DIAL button, “SAVED!” is
shown.
7 You can repeat step 2 to 6 to edit more numbers or press to exit.
To Delete the Phonebook Memory
1 press and release button, icon is shown.
2 Select the required location from the phone book by pressing or .
3 To delete single memory, press DELETE button once. The display
will show the DELETE?. press DELETE button for 2 seconds.
The telephone number and name will be deleted and the
display will now show another number from the phone book.
To delete all entire memory, press and hold DELETE button until
the display shows DELETE ALL?. press DELETE button for 2 seconds
until EMPTY appears on the display.
Storing Numbers In The MEMoRY Button
This telephone has 2 one-Touch memories numbered, M1 and M2.
once a number has been stored in a memory location, you only need
to press one button to make the call.
1 press and release the MENU button until the STORE NUMBER is
shown.
2 press the DIAL button. The cursor will flash in the first position.
3 Enter the required telephone number with a maximum of 22 digits
using the number pad and confirm with DIAL button.
4 press the memory button (M1 and M2). The number has now
been saved and display shows SAVED!
Dialing Using The Memory Buttons
1 Lift the handset or press button and wait for a dial tone.
2 Select the required memory location (M1- M2) by pressing the
corresponding button.
-oR-
1 press the corresponding button.
2 Lift the handset, press the DIAL button or press button, the
number will dial out automatically.
Talk500ER-Trilingual.indd 14 5/13/08 8:39:10 AM