Environmental Water Systems EWS 1354-2-P - Manual (Page 9)

EWS, Inc. / Environmental Water Systems
www.EWSWATER.com
4.4-9
Set-Up and Installation Schematic:
CWL-1354-HF; EWS-1354-HF; EWS-1054-P
DIMENSIONS OF UNITS TO BE INSTALLED:
Inlet (supply) Side
Bypass
Valve
Drain
HF - High Flow 2750 Valve
Valve Cover: Black
NEMA 1 Rated for resistence to dust and moisture.
Hinged: left, Opens: from right, Controls: inside
Back Side: Front Side:
Drain without Restrictor** 3/4” MNPT
**Connected (included) to:
Brass Flow Control Housing with 7 GPM Flow Restrictor
3/4” FNPT x 1/2” FNPT
Materials Needed for
Installation:
1” pipe length to be
determined
Qty. 3 - 1” Ball Valves
Qty. 2 - 1” Unions
Qty. 1- Union for drain line
See Drain Requirements
Union
Union
Outlet (filtered)Side
inlet
1” MNPT
56 1/2”
on center
outlet
1” MNPT
58 1/2”
on center
drain
3/4” MNPT**
57 1/2”
on center
Due to tank and base variances overall dimensions +/- 1”
Materials Needed for Drain**:
1/2” MNPT copper x male adapter
1/2” union
1/2” (min) drain line, pipe
length to be determined
Electric