Environmental Water Systems EWS 1354-2-P - Manual (Page 6)

EWS, Inc. / Environmental Water Systems
www.EWSWATER.com
4.4-6
Inlet (supply) Side:
right side view of valve
with included bypass
and 1” MNPT yoke
Outlet (filtered) Side:
left side view of valve
with included bypass,
drain adaptor, and
1” MNPT yoke
Must use the supplied
dual-port, full flow, noryl bypass
with 1” MNPT yoke.
• Shuts off water to/from the unit
• No additional plumbing for media
replacement or maintenance
• Less costly plumbing installation,
easier start-ups, non-corrosive
overall
height
63”
drain
line
57 1/2”
on center
EWS-1354 comes with adaptor that allows for installation of valve on 13x54 tank and adds 1/2”
Due to tank and base variances overall dimensions +/- 1”
Set-Up and Installation Schematic:
CWL-1054, CWL-1354; EWS-1054, EWS-1354
DIMENSIONS OF UNITS TO BE INSTALLED:
overall
height
62 1/2”
water
inlet/outlet
56 1/4”
on center
water
inlet/outlet
56 3/4”
on center
inlet
side:
supply
from
main
right
top view:
outlet
side:
to the
home
filtered
left
front:
back:
2”cc
drain
line
58”
on center
CWL/EWS-1054
CWL/EWS-1354
CWL-1035 LTD Not Pictured
Installed height approx 44”
valving, setup, install, and startup
exactly the same as these units.