EFCO 8800 Installation Instructions - Manual (Page 6)

EFCO 2009 Page 6
Series 8700 / 8800 Unitized Curtain Wall Installation Instructions
Section 2 - Parts Identification
EXTRUSION
Profile Part # Description Tooling Drawing/Cut Formulas
17C3
7" CAPTURED AND SSG DYNAMIC
STARTER SILL U17C3-001, U17C3-002, U17C3-003,
U17C3-004, U17C3-005
17H8
8" CAPTURED AND SSG DYNAMIC
STARTER SILL U17H8-001, U17H8-002, U17H8-003,
U17H8-004, U17H8-005
17C5
7" DYNAMIC STARTER SILL
GUTTER BASE U17C5-001, U17C5-002, U17C5-003,
U17C5-004, U17C5-005
17D3 SERRATED WASHER
AS REQUIRED PER STRUCTURAL
CALCULATIONS
DYNAMIC STARTER SILL GUTTER
REVEAL SPLICE
REFERENCE FM09 PART DRAWING
TEMPORARY GLAZING RETAINER REFERENCE FM12 PART DRAWING
17H7
8" DYNAMIC STARTER SILL
GUTTER BASE U17H7-001, U17H7-002, U17H7-003,
U17H7-004, U17H7-005
17D5 STACK SILL TRIM
CUT TO LENGTH - HORIZ. UNIT DIM.
MINUS .125
17D0
FABRICATED #
FM10
17C4
FABRICATED #
FM09
STACTIC STARTER SILL GUTTER
REVEAL TUBE SPLICE
REFERENCE FM10 PART DRAWING
17L6
FABRICATED #
FM12