EFCO S5600 Slope Glazed User Manual

Page 8

EFCO CORPORATION 6/2012 PART NO. Y308

Page 8 of 23

Series 5600 Slope Glazed Curtain Wall Installation Instructions

[FIG. 5]

Section IV: Rafter and Purlin Assembly

Rafter and Purlin Assembly

A.)

Slide lower rafter clip in bottom end of rafter and attach with (4) #14 countersunk

screws. (Ref. Fig. #5)

B.)

Insert extruded anchor clip into top

of rafter and temporarily tape in
position until ready for permanent

attachment. (Ref. Fig. #5)

Note: Anchor conditions vary on

a per job basis. Refer to
“APPROVED” shop
drawings for actual
anchoring conditions, and

attach accordingly.

Note: Do not attach anchor clips

to top of rafter with thru
bolts until the rafter is

secured in final position.

#14 X ¾” FHSMS

Rafter

Lower Rafter Clip