Dynojet Data Link Module - OBDII User Manual
Page 27

D A T A L I N K M O D U L E - O B D I I B A S I C C O N F I G U R A T I O N
Configuration
Version 4
Data Link Module-OBDII Installation and User Guide
A-5
The Boot Options window will appear. You can begin configuring the DJDLM-OBDII.
Figure A-7: Boot Options Window
C
ONFIGURING
THE
DJDLM-OBDII
AS
A
S
TAND
A
LONE
W
IRELESS
D
EVICE
The stand alone wireless device is the factory default. This is a direct wireless
connection from your dynamometer PC and the DJDLM-OBDII; no configuration is
necessary.
If the DJDLM-OBDII does not make a direct wireless connection, click Load Factory
Default Settings as shown in Figure A-7. This will load all defaults and allow for AD
Hoc Wireless communication with your dynamometer PC.
1
Open your PC’s wireless connection manager (usually windows manages
wireless).
If you are not sure how to manage your wireless networks, contact Dynojet
Technical Support or a local IT professional.
2
Scan for available networks. You should see a DLM or OBDII in your list.
3
Select DLM or OBDII from the list. The connection will be completed.