Using the brake – Dynojet 248x: DynoTRAC User Guide with Variable Brake User Manual

Page 10

Text mode
Original mode

Document #98111100

Note:

The remote pendant can also be used to
select the Active Gauge and make target
value adjustments. Select the gauge by
double clicking the sample (green) button.
Single click the sample button to toggle
back and forth between the up and down
arrows. Press and hold the sample button
to modify the target value by the step size.

Using the Brake

Step 1

Start the vehicle’s engine and let it warm up to
normal operating temperature. Verify correct
tachometer operation and gauge redline values.

This manual is related to the following products:

248: DynoTRAC User Guide with Variable Brake