Code 3 WingMan for Chevy Impala - Manual (Page 4)

4
FIGURE 4 FIGURE 5
Step 3 Remove the spare tire and place a piece of plywood or boards over the spare tire well (see figure 4). This will provide a more comfortable
position for mounting the template and drilling the mounting holes and the cable hole.
Step 4 Align the cutout corners of the template with the slotted opening in the under side of the trunk of the Impala (see figure 5) and tape the template
in place to keep it from moving (see figure 6 and 7)
FIGURE 6 FIGURE 7
Step 5 With a center punch and a hammer dimple the hole locations to keep the drill from walking off location (see figure 8).
Step 6 Drill the two mounting holes with a 3/8" drill (see figure 9).
FIGURE 8 FIGURE 9