Code 3 LED X Deck Lights - Manual (Page 8)

8
Maintenance
The product is designed for minimal maintenance and trouble free service. Periodic inspection of the product
will ensure trouble free operation. However, occasional cleaning of the lenses is required to sustain maximum
light output. Use plain water and a soft cloth, or Code 3 lens polish and a very soft paper towel or facial tissue.
Note: Plastic scratches easily, be careful when cleaning the optic filters.
Should problems arise during installation or during the life of the product, refer to the guide below for informa-
tion on troubleshooting. Additional information may be obtained from the factory technical HOTLINE at
(314) 996-2800.
Note: Should this Product be diagnosed as containing a diffective light-head module, contact CODE3 and
arrange to ship entire unit back to factory for service.
Product does not activate a. No power to unit a. Check wiring for loose
connection.
b. Power input wires reversed b. Check power connections
c. Damaged or shorted cabling c. Check cables for damage
PROBABLE CAUSE REMEDY
TROUBLESHOOTING