BoonDocker SKI-DOO: E-TEC Turbo - Manual (Page 5)

The extra (Xtra) screen contains features that can be used to add fuel when the adjustable specified
parameters for PSI and RPM are met. Auxiliary button parameters can also be adjusted in the Xtra
screen.
Position the → (cursor) next to Xtra and press the SEL button to advance to the extra screen.
The adjusted FUEL value will determine the amount of fuel that will be added when the auxiliary button
is pushed if button is set to TUN. Note: To adjust parameters position the → (cursor) below the desired
parameter, FUEL, PSI or RPM or Btn and press select.
The PSI or RPM parameter can be turned on or off using the up and down arrow buttons with the
→ (cursor) positioned next to the (OFF/ON) below PSI or RPM.
When the PSI Xtra is ON fuel will be added only when the boost pressure is less than the adjusted value.
To adjust the less than PSI value use the up and down arrow buttons with the →(cursor) next to the PSI
adjustable value.
When the RPM Xtra is ON, fuel will be added only when engine rpm is between the minimum and
maximum adjusted values. To adjust the RPM minimum and maximum use the up and down arrow
buttons with the →(cursor) next to the Min or Max adjustable value.
Note: (The Xtra PSI feature has to be turned on for this function to be activated.)
MAIN FUEL Stats
MENU
→ Xtra # 5.0
FUEL PSI RPM Btn
→ 000 OFF OFF Tst
PSI Xtra on if
→ OFF PSI < 4.6
RPM Min Max
OFF← 3900 5950