BoonDocker SKI-DOO: E-TEC Turbo - Manual (Page 4)

Note: (The ACEL feature is useful for precise tuning, and if misused can create a wide range of tuning
issues. ACEL adjustment should only be made after all other tuning parameters have been properly
adjusted. ACEL adjustments should only be made by persons with an in-depth knowledge of tuning and
Boondocker control box use.)
The ACEL feature is an electronic accelerator pump that can be used to add fuel according to throttle
movement. When the throttle position is advanced (opened) the ACEL is activated.
Sensitivity (Sens): The set sensitivity determines how far or fast the throttle position should be advanced
before the ACEL is activated. The value set below SN will determine the sensitivity, 01 being the most
sensitive and 10 being the least sensitive, 00 being on all of the time.
Amount (AF): The set amount determines the amount of fuel that will be added when the ACEL is
activated.
Duration (DR): The set duration determines the amount of time (number of engine cycles) the ACEL
feature will add fuel each time the ACEL is activated.
DCEL is basically the same thing as ACEL only it will add/subtract fuel when it senses the throttle being
let off.
RPM →AF DR Sens
ACEL 00 00 08