Extra menus – BoonDocker POLARIS: 11-12 PRO 800 Turbo 3D Tuning User Manual

Page 9

BoonDocker Performance – 2379 Heyrend Way, Idaho Falls, ID 83402 – 208-542-4411 / 877-522-7805

www.boondockers.com – email:

[email protected]

– fax: 208-524-7381

Revised 1-20-11

Page 9 of 14

5.3 Stats: Max-2

The second MAX screen displays max boost pressure and max boost air temperature.

MAX PSI Temp Clr

12.2 168 Y



PSI 12.2

Maximum boost

Temp 168

Maximum boost air temperature.

These values are also average over a one second period and are saved when the box is shut off.

Use the arrow keys to move the cursor between Y and N. Pressing SEL when the cursor is on Y will clear the max
values.

Pressing SEL when the cursor is on N takes you to the main screen.

6. Extra Menus

Boondocker’s Synergy feature allows you to trigger nitrous several different ways, using combinations of RPM,
throttle position, and the handlebar button. For example, the handlebar button can be used to arm nitrous, then throttle
position determines when to turn it on. Activation can be further constrained to an RPM range, for best engine
protection.

From the Main Menu, select the EXTRA option. Below is a description of this menu:

Fuel TPS RPM Btn



050 OFF OFF N20

Fuel 050

Fuel setting during nitrous activation

TPS OFF

Shows TPS mode is OFF or displays TPS trigger value if TPS is ON

RPM OFF

Shows whether RPM mode is ON or OFF

Btn N20

Displays button mode (described in detail below)

Fuel:

This is the amount of fuel that will be added when the button is activated for nitrous or tuning (see Btn
settings).

TPS:

To select throttle-position triggering, move the cursor until it is under TPS and press “SEL”, Up or Down

Arrow. The following screen will appear:

TPS N2O on if



OFF TPS > 140

TPS OFF

Shows TPS mode is OFF.

140

TPS threshold value.

Under TPS, press the Up or Down Arrow to toggle the TPS mode ON or OFF.

Move the cursor right to the 140 position, then use the Up and Down Arrows to select the trigger level.
You can adjust it from 50 to 248.

Press the “SEL” button to return to the Main Menu.