BoonDocker ARCTIC CAT: 700/800 Turbo - Manual (Page 5)

BoonDocker – 1585 Hollipark Dr. Idaho Falls, ID 83401 – (208) 542-4411
website: www.boondockers.com - email: [email protected]
Revised 12-01-00 Page 5 of 15
VII. Control Box Menus
A. Intro Screen
When the box is first turned on (by the engine or battery), the Intro screen is displayed. Press any key to go to the main
menu. An example Intro screen display is shown below:
AC Turbo 700/800
vers:5A22xxx
In the example shown above, this screen displays the following information:
AC Turbo
Sled model This box is designed for an Arctic Cat. Boxes for other sleds will have other
lettering. Note: Be sure the Control Box is for your model of sled!
4A5dBDT
Sofware Version This is the software version of the box. The box can be reprogrammed only by
sending the box back to Boondocker.
B. Main Menu
The Main Menu is shown below:
Main

Fuel Stats
Menu ExV Map1U
The current selection is shown by the Right-Arrow and the cursor (underscore below the “F”). Use the arrow keys to
move the cursor. Move the cursor to the desired selection and press the “SEL” key to select the desired menu option from
one of the following:
Fuel Go to the Fuel adjust menus (see Section 1).
Stats Display runtime data, captured data, and recorded maximum data (see Section 3).
ExV Menus for Exhaust Valve and Button setup (see Chapters VII and IX..).
Map Go to the Map menu (see Section 2)
The current Map number is displayed as “Map1U”. This indicates that map number 1 is being used and it is Unlocked.
1. Fuel Adjust Menus
This selection is used to make fuel adjustments. There are five Fuel adjust screens (examples shown below). There are
two screens for adjusting fuel according to Boost pressure. There is one screen for adjusting Accelerator pump fuel.
The first fuel screen comes up after selecting Fuel and pressing a button. Go to the next fuel screen by pressing the “SEL”
button. After pressing the “SEL” on the last Fuel adjust screen, you will return to the Main Menu. Use the Left/Right
Arrow keys to switch between settings. Use the Up/Down Arrow keys to change the settings (if the current map is
unlocked). Sample Fuel adjust screens are shown below (actual rpm settings and number of screens may be different for
your model).
Fuel screen1: M1L LO MD HI tr
3000 00 00 00 00
Fuel screen2: M1L LO MD HI tr
5000 00 00 00 00
Note: for more information on additional fuel or boost
screens refer to advanced mode instructions.
Boost screen1: M1L Lo Md Hi
PSI 00 00 00