Catler JE 4010 - Manual (Page 8)

ASSEMBLING YOUR JE 4010 JUICE EXTRACTOR
6
ASSEMBLING YOUR JE 4010 JUICE EXTRACTOR
Before fi rst use
Before using your JE 4010 Juice Extractor for
the fi rst time, remove any packaging material
and promotional stickers and labels. Ensure
the appliance is switched off at the power
outlet and the power cord is unplugged.
Wash the fi lter bowl surround, fi lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
Step 1
Place the motor base on a fl at, dry surface
such as a bench top. Ensure that the motor
base is switched ‘Off ’ at the control panel,
then switch the appliance off at the power
outlet and unplug the cord.
Step 2
Place the fi lter bowl surround on top of the
motor base.
Step 3
Align the arrows at the base of the stainless
steel fi lter basket with the arrows on the
motor drive coupling and push down until
it clicks into place. Ensure the stainless steel
fi lter basket is fi tted securely inside the fi lter
bowl surround and onto the motor base.
Step 4
Place the juicer cover over the fi lter bowl
surround, positioning the feed chute over
the stainless steel fi lter basket and lower into
position.