Catler JE 4010 - Manual (Page 16)

TROUBLE SHOOTING GUIDE
14
TROUBLE SHOOTING GUIDE
Machine will not work when switched ‘ON’
The safety locking arm may not be correctly
engaged in the vertical operating position
with the locking arm located into the two
grooves on either side of the juicer cover
(page 7 step 5).
Motor appears to stall when juicing
1.
Wet pulp can build up under the juicer
cover if the juicing action is too vigorous.
Try slower juicing action by pushing the
food pusher down more slowly (page
9 step 5). Follow Disassembling and
Cleaning instructions and clean the fi lter
bowl surround, the stainless steel fi lter
basket and the juicer cover.
2. The JE 4010 Juice Extractor will
automatically stop operating if the motor
is stalled for more than 10 seconds.
Either too much food is being processed
at one time or the pieces are not small
enough. Try trimming the food or cutting
into smaller pieces of even size and
processing a smaller amount per batch.
To continue juicing, reset the JE 4010
Juice Extractor by pressing the ‘On/Off ’
switch on the control panel to ‘Off ’ then
turn the appliance back on by pressing
‘On/Off ’ switch to ‘On’.
3. Hard fruits and vegetables will put excess
strain onto the motor if a low speed is
selected. Please refer to the juicing guide
on Page 9 to determine the correct speed
for the fruits and vegetables selected for
juicing.
Excess pulp building up in the stainless
steel fi lter basket
Stop the juicing process and follow
Disassembling instructions. Remove the
juicer cover, scrape off pulp, reassemble and
begin juicing again. Try alternating (soft and
hard) vegetable and fruit varieties.
Pulp too wet and reduced extracted juice
Try a slower juicing action.
Remove stainless steel fi lter basket and
thoroughly clean mesh walls with a cleaning
brush. Rinse the fi lter basket under hot water.
If the fi ne mesh holes are blocked, soak the
basket in a solution of hot water with 10%
lemon juice to unblock the holes or wash in
the dishwasher. This will remove excess fi bre
build up (from fruit or vegetables) which
could be inhibiting the juice fl ow.
Juice leaks between the rim of the Juicer
and the juicer cover
Try a slower juicing speed and push the food
pusher down the feed chute more slowly
(page 9, step 5).
Juice sprays out from spout
Use juice jug and lid provided, or if juicing
into a glass use the custom designed juice
nozzle.